These are clear stickers, pre-designed, and easy to use to apply a design to a tumbler without having to do any prep.
The dimensions for this specific design:
3" x 2"
**This product photo is a MOCKUP, final cut lines and print colors may vary slightly from your screen to the actual print. Every effort has been made to accurately represent what you'll be receiving!**
Similar to a waterslide, you will get full color designs on your tumbler without having to prep the design, seal the design, print the design, or wait for the design to dry - you can epoxy immediately after.
These clear stickers are printed with white ink behind your design to preserve opacity, in other words, these can be used on any color cup and does not require it to be a light cup for the design to show through.
Stickers vary in size and do not need a transfer sheet to apply, but one can be used.
Designs will be offered in one size at the moment but other size options may be available in the future.
Sizes may vary slightly due to specific designs, but be sure to read the description to insure the size offered is the size needed/wanted.
It is recommended to have a layer of cured epoxy on your tumbler prior to application. Be sure the area you are applying the decal to is clean and smooth. Using your finger, make sure all of the air bubbles are out and the decal is completely stuck to the tumbler, rubbing from the center of the decal out. Ensure there are no fold or crinkles as this may show after epoxy.
The clear outline of the decal may show depending on the style and color of the cup being placed on, but is typically blended in with the cup after a layer of epoxy is applied on top. At times, after epoxy, the clear outline may still faintly be visible, and again, this will depend on the design/color of the cup. Typically on lighter color and glitter tumblers the outline is rarely noticeable, but may show faintly on dark solids color tumblers.